This command creates a DXF file to import the mine plan pillars and perimeter to the Subsidence Deformation Prediction System program. The pillars and perimeter polylines created in Carlson with the layers PILLARS and PERIM. The PERIM layer is written to the DXF file as PANELS for SDPS. This routine provides the user the ability to specify the direction the pillar polygons are drawn. SDPS requires the pillars to be drawn in the counter-clockwise direction. For additional information on this procedure, refer to the SDPS manual.
DXF File for SDPS Enter a file name. The default directory is the SDPS directory defined in Configure .
Pulldown Menu
Location: AdvMine
Keyboard
Command: sdpsout
Prerequisite: Polylines in the
PILLARS and PERIM layers and
prediction points on the POINTS layer, if prediction points are input.
File Name: \lsp\sdpsout.lsp