Cut/Fill Centroids

Function

This command visually shows cut/fill areas in your drawing and finds the center of mass or centriods for every cut and every fill region. Also, a report can be created to show volumes in each region.

Points are created to show the centroids locations. Also, labels can be created to display the volumes in the different regions.

Here is the Cut and Fill Centriod Report for the above example. It shows the volumes, the coordinates of the centroids, and the Earth Movement Report. The Earth Movement Report shows the minimal distances for moving Cut to Fill areas.

Prompts

Loading edges...
Loaded 1199 points and 3391 edges
Created 2193 triangles

Loading edges...
Loaded 574 points and 1393 edges
Created 820 triangles

Loading edges...
Loaded 8732 points and 25651 edges
Created 16920 triangles

Generating report:
Region #2
3053.7 Fill
Reading the selection set ...
Joining ...
Joined 437 entities.
Region #1
3822.9 Cut
Reading the selection set ...
Joining ...
Joined 636 entities.
Region #3
1.8 Fill
Reading the selection set ...
Joining ...
Joined 49 entities.

Prerequisite: Existing and Design surfaces
Keyboard Command: tk_cutfillc