Edit
Drillhole
Function
This
command allows you to screen pick an existing drillhole and edit
its properties. When you select
Edit
Drillhole
from the Drillhole menu,
a
command prompt shows:
"Select
Drillhole to edit:" Move your pointer around the screen
to
pick the drillhole you want to edit. Once a drillhole is picked
on the screen, the following dialog box appears:
●
Edit: Make
changes to the highlighted strata name. Thickness, Bottom
Elevation, Depth.
●
Insert Above: To
add a Strata above the highlighted strata name.
●
Append to Bottom: To
add a strata to the bottom of the available strata name list.
●
Remove: Removes
a strata from the available Strata Name list.
●
Surface Elevation:
This
field can be set by you to establish th surface elevation
of the drillhole.
●
Drillhole Name: The
name of the drillhole
●
Description:
The screen display description of the drillhole
●
Adjust Bottom
Elevations: Will make
adjustments to the bottom elevation
based on thickness changes.
●
Adjust Next
Thickness: Will adjust the next
thickness to hold the
bottom elevation unchanged.
●
Save: This
caommand saves this drillhole as listed.
●
Zoom In: This
increases the magnification of the black view window, cross-section
view of the drillhole.
●
Zoom Out: This
decreases the magnification of the black view window, cross-section
view of the drillhole.
●
Cancel: Ends
Drillhole placement routine without making changes.
Keyboard Command: tk_chedit
Prerequisite: drillhole
information