Draw
Strata Cut
Depth Contours
Function
This
command will draw the Strata
Cut
Depth Contours. This command
creates contours for the
cut depth between the design surface and
strata.
You must have
created Strata Surfaces through the Make
Strata Surface command.
Then select Draw
Strata Cut Depth
Contours
from the Drillhole
menu. You will be prompted to select the Strata from the
dialog
box below.
You can assign
a contour interval and contour layer for the contours to
be drawn.
Keyboard Command: tk_chdepth
Prerequisite: Make Strate
Surface