Point
Function
This command allows you to digitize
individual points one at a time. The first time it prompts you the Digitize Points Dialog for entering
point
symbol styles, point prompt settings and number settings, starting
point number and layer name. If you want to enter the elevation and
description for each point, select Prompt
for Descriptions and Prompt
for Elevations. After
having digitized a point, you can continue to digitize next point by
picking the point on the drawing. The command defaults to the last
layer name, point symbol, elevation, description and the last point
number plus 1. If you have finished digitizing points, press Enter to
finish.
Prompts
Digitize
Points Dialog
Specify a layer name and select the point symbol, point prompt settings
and number settings.
Pick point to create (Enter to end): pick a point on the drawing
Select/<Enter Point Elevation
<>>:
enter the elevation or type <Select> to select the elevation text
on the screen
Enter Point Description <>: enter the point
description
Result like "N: 1231.16 E: 1099.17 Z: 30.00" would be
display on the command line, and a point would be drawn on the screen
with the text of its number, elevation and description.
Pick point to create (Enter to end): pick next point or
press Enter to finish digitizing points
Keyboard Command: dig_pt
Prerequisite: Have a
digitizer board and a puck connected to your computer, and have Wintab
driver installed. The digitizer has been correctly set up. Have done
tablet calibration for
current drawing.