This routine calculates section and 1/4 section corners
by two way control. Enter the point numbers for Point A and B. These
numbers can be entered in manually
or picked from the screen by selecting the Pick radial button at
bottom right. In a like manner, the
Record Chainages from A to X and from A to B can be entered manually or
by using the Pick radial button
to pick from the screen. After
selecting OK, a dialog box will display where the Point number,
description
and elevation can be edited. The point
default settings determine the available data for editing. For example,
if the option for Automatic
Point Numbering is turned off in the Point Defaults, then the field for
the
point number will be grayed out. If elevations are turned off in the
point defaults, then the
elevation field with be grayed out. This also applies to the
description of the point as well. GLO is an acronym for Government Land
Office.
GLO Proportioning Two Way Control dialog
Pulldown Menu Location:
COGO > Section Corners > GLO
Corner
Proportioning
Keyboard Command: glo_twoway
Prerequisite: A coordinate
(CRD) file
File Name: \lsp\cgsc.arx