This command locates points at screen picked intersections. The
AutoCAD object snap mode
is set to intersection. This routine is similar to the Locate Point
command, with an additional
check that makes sure there is an intersection at the picked point. If
there is not an intersection at the
picked point, then no point is created.
Pick Intersections Points dialog
APParent intersection on [<Yes>/No]:
Y
This first prompt is very important. Apparent Intersection snaps to
the apparent
intersection of two objects (arc, circle, ellipse, elliptical arc,
line, multiline, polyline, ray, spline, or xline)
that do not intersect in 3D space, but may appear
to intersect in the current view. This allows you
to locate a point at the theoretical intersection
of two 3D entities. You should answer No to this prompt if you want to
ignore theoretical
3D intersections.
[app on] Pick intersection Point: pick a point
[app on] Pick intersection Point: press Enter to end
Pulldown Menu Location: COGO >
Locate at Intersect
Keyboard Command: pickint
Prerequisite: Intersection of two entities
File Name: \lsp\pickint.lsp