This routine
calculates section and 1/4 section corners by one way
control. First, enter the point number for Point A. This number can be
entered in
manually or picked from the screen
by selecting the Pick radial button at bottom right. In a like
manner, the Bearing from A to B
can be entered manually or by using the Pick radial button to pick
from the screen. The distance from A to
X can be specified in the same manner as above. After selecting OK,
a dialog box will display where the Point
number, description and elevation can be edited. The point default
settings determine the available data for editing. For example, if the
option for Automatic
Point Numbering is turned off in the Point Defaults, then the field for
the
point number will be grayed out. If elevations are turned off in the
point defaults, then the elevation
field with be grayed out. This also applies to the description of the
point as well.
GLO Proportioning One Way Control dialog
Pulldown Menu Location:
COGO > Section Corners > GLO Corner Proportioning
Prerequisite: A coordinate
(CRD) file
Keyboard Command: glo_oneway
File Name: \lsp\cgsc.arx