This command is used to calculate building corner offsets that are
extensions of the building faces. The below example was for 10'
offset points to be generated starting at point number 510. Starting
point number: This is the point number that the
offsets are supposed to start. Select the building object by
screen
picking, and then press enter. Enter offset amount: This is the
distance that the
offsets are extended past the end of the building face line.
Select building perimeter. make selection
Starting point number <373>:
510
Select building perimeter.
Select objects: 1 found
Select objects:
Enter offset amount <10.00>: press Enter
Pulldown Menu Location: COGO
Keyboard Command: bldg_pnts
Prerequisite: An object that represents a building
File Name: \lsp\poly3d.arx