This command locates a point at the intersection of two lines. The lines can be defined by picking two points, selecting a line or typing in a bearing. After the lines are defined a point symbol is located at the point of intersection.
[Enter] to use preview point or select 1st Base point ?
Options/<Pick point or point number>: press Enter
Define 1st angle by (Line/Points?Right/Azimuth/Bearing)
<Bearing>: L
Select Line or Polyline that Defines 1st
Bearing: select
Enter 1st Offset Distance
<0.0>: press Enter
2nd Base point?
Pick point or point number: pick a point
Define 2nd angle by (Line/Points/Right/Azimuth/Bearing)
<Line>: P
[Enter] to use preview point/or pick 1st point that defines 2nd
bearing.
Pick point or Point number: pick point
2nd point that defines 2nd bearing ?
Pick point or Point number: pick a point
Enter 2nd Offset Distance
<0.0>: press Enter
Enter/<Select text of elevation>:
select
The point is then located at the computed point of intersection.
|
Bearing-Bearing Intersect example |
Pulldown Menu Location: COGO > Locate at Intersect
Keyboard Command: bb
Prerequisite: None
File Name: \lsp\bbint.lsp