This command will label the last area calculated with one of the
Area commands in the
manner defined in the Area Defaults dialog. The command prompts
for a point where the label will
be centered.
SQ. FEET: 50265.3 SQ. YARDS:
5585.0 SQ. MILES: 0.0
ACRES: 1.2 PERIMETER: 889.4
Lot Description <2>: 1
Pick area label centering point
(Enter
for none): pick a point
Pulldown Menu Location: Area/Layout
Keyboard Command: lastarea
Prerequisite: Set Area Defaults, and use one of the
Area commands to calculate an area.
File Name: \lsp\areaac.lsp