This command allows you to calculate the area of a perimeter or lot
defined by lines, arcs,
or polylines. Default settings for this command are set in
Area Defaults. One of these settings is Max gap to join. If
there is a gap greater than this value, the area is not reported, and
the program
will show where the gap is with a temporary X symbol. The area data
shows up on the text screen. You can then choose to plot the area
information to the drawing, or, by hitting Enter, just read it from the text
screen.
Select lines & arcs or polylines of perimeter for area
calculation.
Select Objects: select lines and arcs or polylines
Lines and arcs are then joined together and the area calculated.
Pick area label centering point (Enter for none): pick a
point
The area is then plotted at the point selected.
Pulldown Menu Location: Area/Layout
Keyboard Command: joinarea
Prerequisite: Lines, arcs, or polylines to define the area
File Name: \lsp\joinarea.lsp