This command labels point elevations and aligns with a polyline. The point elevations are read from Carlson points drawn on the screen. The options for the labels are set in the first dialog. The Text Size Scale and Offset Distance Scaler are relative to the current horizontal scale, which is set in Drawing Setup. These scalers are multiplied by the horizontal scale to obtain the actual AutoCAD units. The Side for Labels is relative to the direction the polyline is drawn.
Label Elevations Along Polyline dialog
Select alignment polyline: pick a polyline
Select points to label.
Select objects: pick the points
|
|
| The alignment polyline with points to label is shown |
Pulldown Menu Location: Annotate
Keyboard Command: elevlab
Prerequisite: Polyline and points
File Name: \lsp\elevlab.lsp
