This command will label a coordinate on the screen. You can choose to label the northing and easting, the Z elevation, or all three properties. The point can be picked on screen, or specified by point number from the current coordinate (.CRD) file. Options include drawing a box around the label, labeling both feet and meters, setting the layer name for the label, setting the display precision, deciding whether or not to use a leader and selecting a change in the symbol used to mark the point. You can also set the text prefix and suffix for the label. Additionally, you can locate a label on Real Z Axis.
There
is also an
option to label the Delta X, Y and/or Z between two points, which is
called Label Delta Between Two Points. When this option is clicked On,
and after the prompt, you will first click two points locations. The
label, with the delta value(s), will then be placed precisely in
between these two pick locations. If, for example, the North, East and
Elevation button is chosen, the resulting label will show the N, E and
Z delta values.
Label Coordinates/Elevation dialog
Point to Label ?
Pick point or point number: pick a point
Point to Label (ENTER to End)?
Pick point or point number: press Enter
Pulldown Menu Location: Annotate
Keyboard Command: labcoor
Prerequisite: None
File Name: \lsp\labcoor.lsp