Process Fill/Cut Design

Function

This routine is simply the execution of the Define Fill/Cut. It creates the 3D design of the fill or cut. Some examples are shown below. The process window shows the elevation it is on and the percent done. The benches can be seen drawing in realtime as it calculates each one.

Valley Fill Example

Stockpile with Ramp Example

Benched Pit with Ramp Example

Prompts

No prompting. It processes the current RMP file.

Pulldown Menu Location: Ore
Keyboard Command: ramp
Prerequisite: Need to have run Define Fill/Cut and created a template
File Name: \lsp\ramp.dub