This command reverses the direction of mining within a pit. It is particularly useful in conjunction with the command Assign Directions, <Auto>, since the automatic mode may assign direction to many of the pits opposite from the desired direction. The result is shown below, where the two pit 10s were reversed.
Reverse direction to whole pit or to a specific bench
[<Whole>/Bench]:
Select pit polylines to have direction reversed:
Select objects:
Pulldown Menu Location: Boundary in Advanced Mining
Keyboard Command: reverse_dir
File Names: \lsp\advmine1.lsp, \lsp\mineutil.arx
Related Commands: Assign Directions, Display Directions,
Clear Directions, Create Pit
Plines from Mineplan