This command attaches a pit name and site name to closed polylines that are used as inclusion or exclusion perimeters routines like Surface Mine Reserves and Surface Equipment or Production Timing.
Label area names (<Yes>/No)? Choose whether or not to label.
Text height <4.00>: press Enter to accept 4 drawing
units (ft or m tall) or enter a new text height
Auto place labels in center (<Yes>/No)? press Enter to accept To manually pick the label position,
answer No to this prompt.
Prompt for exclusion areas (Yes/<No>)? Yes
If you are only choosing inclusion areas, then
you can answer No to this prompt to skip the exclusion polyline prompt
and speed up
entry.
Site name <Site 1>: press Enter to accept Site 1,
or type a new site name
Pit name <Pit 1>: press Enter to accept Pit 1, or
type a new pit name
Select Inclusion perimeter polylines.
Select objects: pick closed polylines for areas to
include in calculations
Select Exclusion perimeter polylines.
Select objects: pick closed polylines for areas to
exclude from calculations
Specify another area (<Yes>/No)? press Enter to accept Yes or type N for no If you do specify
another area, then the Site Name remains the same, but the Pit Name is
automatically incremented by one for efficient naming.
Pulldown Menu Location: Boundary in the Advanced Mine Module
Keyboard Command: pitname
File Name: \lsp\pitname.lsp