This command reports the pit name and site name that are attached to
the selected polyline at the command line and shows the pit graphically
with a yellow solid fill.
Pick inside pit polyline to identify (Enter to end): pick
inside a polyline If you pick on or near a common line, one pit
is highlighted and you are prompted to Press N for next selection or
Enter to accept current, highlighted pit line. The selected pit line is
filled with a solid yellow hatch that erases when the next pit is
selected, or the command is finished.
Site Name: Site 1
Pit Name: Pit 1
Select pit polyline to identify: press Enter to end
Pulldown Menu Location: Boundary in the Advanced Mine Module
Keyboard Command: pitid
File Name: \lsp\advmine1.lsp