Identify Predefined Boundaries
identifies any poylines in the drawing that have been previously Tagged
as Predefined Boundaries. The Pick option prompts to pick a
polyline, and if it has been Tagged as a Predefined Boundary, the
Boundary Type and Boundary Name are presented at the command
line. The Search option scans the entire drawing for Tagged
Predefined Boundaries, highlights them in the drawing, and lists their
location, layer, type and name at the command line.
Predefined Boundaries are applied in Surface commands such
as
Two Surface Volumes and Triangulate &
Contour. Inclusion polylines limit processing to inside the
polyline, e.g. an inclusion polyline for volumes would be the limit of
disturbed area. Exclusion polylines
prevent processing inside the polyline, e.g. a building
perimeter could be an exclusion polyline
for contouring. Identifying polylines that have been
previously tagged as Predefined Boundaries is often helpful during
surface modeling.
Pick polylines to check or search drawing [<Pick>/Search]: press
Enter for default
pick method
Select boundary polyline: pick a polyline
Inclusion boundary polyline for
Site 1
Select boundary polyline (Enter
to end): press Enter
Pulldown Menu Location: Surface
Keyboard Command: plzoneid
Prerequisite: Assigned, predefined inclusion/exclusion closed
polylines
File Name: \lsp\plzoneid.lsp