This command reports the cut/fill areas and volumes within given
ranges of slopes. There is an option to use another section for
cut/fill reference.
Select Section to Process Select .SCT file
Select Slope Zone dialog Select
No
Report slope or horizontal area
[<Horizontal>/Slope]? s
Slope format [<Percent>/Ratio]? Enter
Greatest slope % of zone 1: 3
Greatest slope % of zone 2: Enter
Starting station to process
<0.000>:
Ending station to process <0.000>: 1000
The Standard Report Viewer
creates a
report called Section Slope Zone Analysis Report.
Pulldown Menu Location: Sections > Section Utilities
Keyboard Command: sctzone
Prerequisite: .SCT file
File Name: \lsp\regrade.arx