This command generates a report of a section file
for the specified stations. The information contained
in the report is determined by the settings in the
Section Report Options dialog box.
Decimal Places: Specify the display precision for stations and elevations.
Use Row-Column Report Layout: When
checked, offsets are reported in columns. Example
reports showing the difference are shown below.
Use Report Formatter: Report output is directed to the Report
Formatter which allows for
custom reports, as well as being able to export the report to Microsoft
Excel or Access.
Report Descriptions: Controls whether the descriptions for each
section point are reported.
Specify User-Entered Offsets To Report: After choosing OK
from this dialog, the program will prompt for additional offsets to
report with interpolated elevations. These are for offsets that don't
already exist as section points in the section file.
Report Slopes: Will report the slope between section
points.
Specify how to report the slopes, either none, percent, ratio, or auto
format. Auto format
means that slopes less than 10% are reported in percent, while greater
slopes are reported as ratios.
Stations to Report: Specify either a range and interval of
stations to report or enter each
station one at a time.
Grades to Report: This applies to section files that
contain subgrades. For these section files,
you can choose which grades to report (top surface or subgrades). All
is also an option.
Description Match: This field can be used to filter the section
points by their description.
Report Elevation Difference: Reports section elevations by
Reference Grade Point, Section File or choose none.
Reference Grade Point: Specify the reference grade ID. Only
available if Grade Point option is selected, as mentioned above.
Select Reference Section File: Specify a reference file. Only
available if Section File is chosen, as mentioned above.
Elevation Difference at Offset Interval: Used if there is an
elevation difference.
The next three options only available if Elevation Difference at Offset
Interval is clicked.
Offset Interval: Value required.
Left Limit/Right Limit: Values required.
Section Report Options dialog choose options
Section File to Report dialog choose existing file
Starting station for report <0.000>: press Enter
Ending station for report <1147.478>:
press Enter
Station interval (A for All) <100.0>:
press Enter
Sample Report
|
Pulldown Menu
Location: Sections
Keyboard Command: sctrprt
Prerequisite: A section file (.sct)
File Names: \lsp\sctrprt.lsp, \lsp\profedit.arx,
\lsp\scadewrk.dcl