Print Earthwork File Report

Function

This command is used to display/print an earthworks (.EW) file. This file can be generated by several commands such as Calculate End Area or Digitize End Areas. A standard file selection dialog prompts you for the .EW file, then the volumes report is displayed in the Standard Report Viewer.

Prompts

Earthworks File (ew) dialog select existing file
Standard Report Viewer screen appears with volumes.

Volumes From File main.ew

Station     Fill(sf)   Cut(sf)    Interval    Fill(cy)    Cut(cy)
 34+00.00   0.0000     24.7082    0.0000      0.0000      0.0000
 35+00.00   0.0000     75.0246  100.0000      0.0000    184.6904
 36+00.00   0.0000     29.1810  100.0000      0.0000    192.9733
 37+00.00   0.3867      1.4916  100.0000      0.7161     56.8011
 38+00.00  31.1798      0.0000  100.0000     58.4565      2.7622
 39+00.00  57.6465      0.0000  100.0000    164.4931      0.0000

Total FILL from Station 34+00.00 to 39+00.00 = 223.6657 (cy)
Total CUT  from Station 34+00.00 to 39+00.00 = 437.2270 (cy)

Pulldown Menu Location: Sections
Keyboard Command: ewreport
Prerequisite: .EW file
File Names: \lsp\eworks.arx