This command will create a section file at given cross slopes and
minimum overlay from
a reference section file. An existing and a proposed .SCT file must be
selected, along with additional section information. A choice between
Overlay Value or Proposed Elevation must be made. When the Overlay
Value option is chosen, a Minimum Amount of Overlay must be entered.
When the Proposed Elevation option is chosen, a Proposed Centerline
Elevation value must be entered.
Overlay Section Data dialog Select file names and options, click OK
Report viewer creates a proposed section file report.
Pulldown Menu Location: Sections > Section Utilities
Keyboard Command: sct_overlay
Prerequisite: A .SCT file
File Name: \lsp\regrade.arx