This command will determine the volume and haul distance for each
group of net cut and net fill station ranges along a road. The
program calculates the optimized cut to fill movements so that the
total volume-distance moved is minimized.
You will first be prompted to select the
Existing Ground section file
and the Design Surface section file. These two surface files will be
used to determine the Mass Haul quantities. If you do not have either
of these files, you can create them using the different Create Sections
commands under Roads. After
you selected your section (.sct) files, the following dialog
will appear.
Mass Haul
Analysis
Existing Section> C:\Documents and Settings\Todd
Carlson\Desktop\Takeoff\Drawings\demo2-og.sct
Final Section> C:\Documents and Settings\Todd
Carlson\Desktop\Takeoff\Drawings\demo2-fn.sct
Haul Distance Ranges
Net Cut Net
Fill
Total In Sta
Haul
0 200 Over
Station Station
Cut(CY) Import Fill(CY) Export
Volume Volume
Volume 200
500 500 Avg Haul
0+00.000 1+00.000
1+00.000 2+50.000 1251.729
0.000 1251.729 0.000 1251.729 1127.595
124.134 124.134 0.000
0.000 153.135
12+00.000 10+50.000
13+80.000 12+00.000 887.367
0.000 887.367 0.000 887.367
239.938 647.429 542.651 104.777
0.000 179.887
13+70.000 15+05.340
13+90.000 15+23.200 95.633
0.000 95.633 0.000
95.633 51.559 44.074
44.074 0.000 0.000 137.235
13+80.000 14+20.000
14+20.000 14+50.000 216.434
0.000 216.434 0.000 216.434
96.872 119.563 119.563
0.000 0.000 38.560
14+60.000 14+50.000
14+80.000 14+60.000 43.333
0.000 43.333 0.000
43.333 18.620 24.712
24.712 0.000 0.000
11.818
14+70.000 15+00.000
15+00.000 15+14.270 82.194
0.000 82.194 0.000
82.194 29.738 52.456
52.456 0.000 0.000
24.395
Total:
9808.744 0.000 69788.70 0.000
74189.76 66786.40 7403.360 1288.814 930.060 783.423
130.579
Prerequisite: A Section Alignment File and Existing and Road
Sections
Keyboard Command: masshaul