Cut Sheet

Function

This command compared a base grade section (.SCT) file with a final grade section (.SCT) file. It then reports the cut or fill values between these two sections files. The cut and fills are calculated at two offsets in a specified range of stations. The report shows a column of cut and fill values for each offset as shown below. The two section .SCT files should have matching stations, because the program compares the offsets and elevations of a station in the first section file with the offsets and elevations of the same station in the second section file.

Prompts

Base Grade Section File dialog choose existing .SCT file
Final Grade Section File dialog choose the other existing .SCT file
Left offset: -10
Right offset: 10
Range of stations: 25.0 to 275.0
Enter the starting station to process <25.0>: press Enter
Enter the ending station to process <275.0>: press Enter

         Cut Sheet Report

          -10.000       +10.000
Station   Offset   CL   Offset
  25.00   +4.55    |    +4.07
  50.00   +21.10   |    +21.95
  75.00   +24.26   |    +26.97
 100.00   +30.63   |    +33.54
 125.00   +41.35   |    +42.52
 150.00   +49.61   |    +50.55
 175.00   +49.02   |    +46.88
 200.00   +43.65   |    +45.45
 225.00   +24.22   |    +29.03
 250.00   +7.44    |    +7.27
 275.00   +41.58   |    +33.21

Pulldown Menu Location: Sections > Cut/Fill Analysis
Keyboard Command: cutsheet
Prerequisite: Two section .SCT files
File Name: \lsp\profedit.arx