This command draws a template and labels the slopes and distances. The cut and fill treatment can be shown on the left and/or right sides. All the cut/fill slopes are shown for the different depths when multiple slopes are defined. There are options to draw the normal template, super elevation or details of different sections.
You will be prompted to select the template (.TPL) file first, then
the Typical Section dialog
appears. Specify the parameters and press the Draw button.
Template File to Read Specify a template file.
Typical Section dialog Set your options then click Draw.
Pick Starting Position: pick a point
Curb Detail |
Normal Typical Template |
Typical Template with Left Super Elevation |
Pulldown Menu Location: Design
Keyboard Command: typical
Prerequisite: A template file (.TPL file)
File Name: \lsp\eworks.arx