This command calculates and labels the slope of a line, polyline
segment,
an entire polyline, or pair of points, as drawn on a profile. The
command
starts with the Slope Report Options dialog.
Horizontal Scale: Specify the horizontal scale of the profile.
Vertical Scale: Specify the vertical scale of the profile.
Text Size Scaler: Specify the text size scaler.
Decimals: Specify the display precision for the slope labels.
Label Symbol: When checked, the degree symbol or percent sign
will be used in the label.
Label Arrow: When checked, a slope direction arrow will be
included.
Label Minus Sign: Will label a minus sign on negative slopes.
Label Format: Specify how to label the profile slopes. The
automatic
settings means to use a percent label for any slope less than 10%. and
a
ratio for any slope greater that 10%.
Label Method: Choose to label the entire profile at once or to
pick individual segments.
Reduce Profile Points: When checked, the number of labels
created
on the profile will be reduced based on the Offset Distance value. Applies
only to the Entire Polyline selection option..
Offset Distance: Specify maximum offset between profile
vertices.
Only available when Reduce Profile Points toggle is checked on.
Slope Report Options dialog box
Points/<Select line or polyline to list-label>: pick
a polyline
Slope Distance> 600.33 Horizontal Distance> 600.00
Elevation Difference: 20.00 Slope Ratio: 30.00:1 Slope Percent: 3.33
Starting point of label ([Enter] for none): pick
a point
Points/<Select line or polyline to list-label>: press
Enter If you choose P for points, you go into the Points mode and can label
the slope of any pair of screen picks on the profile.
Pulldown Menu Location: Profiles
Keyboard Command: llg
Prerequisite: A profile grid and profile polyline
File Name: \lsp\llg.lsp