This command labels the elevation difference between two profiles at specified stations. The text label is drawn along the polyline centerline in plan view. Cut is labeled as negative and fill as positive.
Existing Ground Profile dialog Specify a profile file to read.
Final Surface Profile dialog Specify an existing profile file
to read.
Select centerline polyline: Pick a polyline. This represents the
centerline and should be drawn in the direction of increasing stations.
Starting station of polyline <0.0>: press Enter
Label all polyline vertices (<Yes>/No)? press Enter
This option will label the elevation difference at the stations of each
point on the polyline centerline.
Pick points to label (Yes/<No>)? press Enter This
option allows you to pick points along the centerline to label.
Prompt for text position (Yes/<No>)? press Enter
This option allows you to pick the position of each elevation
difference
label. Otherwise the text is automatically centered at the point on the
polyline.
Text size <4.00>: press Enter
Pulldown Menu Location: Profiles > Profile Utilities
Keyboard Command: prodiff
Prerequisite: Two profile files
File Name: \lsp\profedit.arx