This command writes a centerline (.CL) file from a polyline. The northing and easting for each vertex of the polyline is written to the centerline file and each arc in the polyline becomes a circular curve.
Centerline file to Write dialog Enter the .CL file name to create.
Beginning station <0+00>: press Enter Or, type in
the beginning station then press Enter.
Select polyline that represents centerline: pick the polyline
that represents your centerline
Pulldown Menu Location: Centerline
Keyboard Command: clpline
Prerequisite: A polyline
File Name: \lsp\quikcl.lsp