This command labels the distance and slope of 3D polyline segments, or between two picked points, in plan view.
In the Annotate polyline dialog box, choose the selection method;
either the Entire polyline, Polyline segment, or Any two points.
Then
choose the location and/or visibiltiy for the Horizontal distance,
Slope distance, Slope %, and Slope ratio, enter any desired Prefixes
and/or Suffixes, and the
desired decimal Precision for each. Choose whether to Draw slope
leaders, which are arrows pointing in the direction of the slope.
Choose whether to Erase old annotations, and set the Text size scaler,
Text offset scaler, and other related variables. Scalers are
multiplied by the
drawing scale to determone the actual sizes for the specified objects.
Choose the Annotation layer from the drop list. Pick OK, and you
are prompted to select the polyline or segment or two points to
annotate.
Set up variables as desired in Annotate polyline dialog box, pick
OK. Depending on your Selection method, the prompt will either
read:
Select a polyline segment to
annotate:
pick the polyline
or
Select a polyline to annotate: pick
the segment
or
Pick first point: _nea to
For snap on.
Pick second point: _nea to
Press enter to return to the Annotate polyline dialog box, in the
dialog box, pick Cancel to end.
Pulldown Menu Location:
3D Data
Keyboard Command: label3dp
Prerequisite: A 3D polyline
File Name: \lsp\poly3d.arx