Draw Spot Elevations

Function

This command creates spot elevation labels based on user settings.

Symbol: Specify the symbol to be used for the location of the spot elevation. If Draw with Leader is selected, the use of a symbol is automatically disabled.

Placement Method:
Screen pick: Prompts the user for a screen pick or a point number to specify the location of the spot elevation.
Interval: Prompts the user to select an existing polyline and specify an interval distnace to set spot labels along the polyline. It also prompts for number and interval for additional labels to be set at offset distances right and/or left of the polyline.

Use Surface Model:
Off: User is prompted to supply elevation for each new spot elevation
Single Surface File: Prompts user to specify surface model file to derive elevations from
Two Surface Difference: Prompts user to specify an existing surface file and a design surface file, and labels the elevational difference between the two.

Pulldown Menu Location: 3D Data
Keyboard Command: bldg_perim
Prerequisite: A pad
File Name: