This command will change the elevation of selected entities. It can
move the entity to a
specified elevation from it's current elevation (absolute) or do a
differential change by adding or
subtracting a value from it's current elevation. If Carlson points are
selected, their elevation attribute text and the elevation stored in
the external coordinate file are changed. If the points are in
the drawing at their real Z, this is also adjusted, however, if they
are in the drawing at a fixed elevation, e.g. 0, the point blocks
remain at that elevation.
Ignore zero elevations (<Yes>/No)? press Enter
If you answer
No, then entities with elevation 0 will be changed. If you
are editing Carlson points that are placed in the drawing at a fixed
elevation of 0, you must respond No
to this prompt for them to be affected.
[A]bsolute or [D]ifferential Change <A>:
A
Elevation to change to: 125 By using the Absolute
option all entities selected are changed to
the elevation 125.
Select Entities for elevation change.
Select objects:
Select objects: press Enter
Pulldown Menu Location: 3D Data
Keyboard Command: chgelev
Prerequisite: Something to change
File Name: \lsp\scadutil.arx