This command allows you to change 2D polylines to 3D polylines by elevation labels.
This command will prompt you for samples of the elevation labels and the polylines to convert. The program uses these samples tp know the layer names for the labels and linework to process. Then select all the polylines with their labels you want to convert.
You will then be prompted to enter in an elevation to add to label values. Often times elevations are abbreviated to save time and space. If every elevation in a drawing is in the 500s instead of labeling every elevation 539.97, 540.02, 540.11 sometimes, like in the example on the side, they are listed as 39.97, 40.02, 40.11. This command allows you to add a given amount, such as 500, to every label elevation to produce the correct elevation in the drawing.
This command will assign elevations from the labels to nearby vertices. If vertices do not have a close elevation label than they will be interpolated from vertices that are nearby elevation labels.
Select sample of elevation text:
pick a text label
Select sample of a polyline to convert:
pick a polyline
Select polylines to convert and
elevation labels.
Select objects: select all
the entities to process
19 found, 19 total
Enter elevation to add to label values <0.00>: 500
Pre-processing entity #19 of 19
Filtering text entities
Processing elevation text #18
Remaking polyline #1
Pulldown Menu Location: 3D Data > 2D to 3D Polyline
Keyboard Command: elevfb
Prerequisite:
2D polyline and elevation labels
File Names: