This command compares the sewer network structure locations with
the reference surface and centerlines. The current sewer surface files
is used as the elevation reference for the structure rim elevations.
Each structure has the
option to assign a reference centerline and the structure will record
the station and offset from this centerline. If this routine finds a
difference between the structure location and these reference files,
then there will be an option for whether to update the sewer
structures. For differences with the reference centerlines, the
structure can be moved to the
position of the recorded station and offset along the modified
centerline. For reference surface changes, the structure rim
elevation can be updated and there are two options for updating the
invert elevation. One method is to hold the structure depth and change
the invert elevation. The other method is to hold the invert elevation
and change the depth.
Pulldown Menu Location: Network->Check Sewer Network
Keyboard Command: chkswrref
Prerequisite: none
File Name: \lsp\cntr_grd.arx