This command reports and labels the value of grids at user-specified points. Up to nine grids can be analyzed at a time. After loading the grids, the program will display each grid value at the current cursor position in real-time as you move the cursor. The values are displayed in a pop-up window that appears in the top left corner, but can be moved around.
The grids to inspect are specified in the dialog shown below.
You can either type in the grid file name or pick the Select File
button
to choose the grid file. To remove a grid from processing, erase the
grid file name or pick the Clear button to remove all the grids from
the
dialog. The Load Pre-Calc button lets you select grid files from the
list
of grids stored in a Pre-Calculated file (.pre). The Name field is used
for labeling the grid values. It will default to the grid name, but may
be edited.
When you pick a point or enter coordinates, the program will label
the grid values
and draw a symbol at the point. The Select Symbols option will prompt
you to select symbols from
the drawing and the program will label the grid values
at each symbol position. For example, you can use
this option to quickly label the grid values at each
drillhole symbol.
Select Symbols/<Enter or pick point>: pick a point
Select Symbols/<Enter or pick point>: press Enter
Pulldown Menu Location: StrataCalc in Advanced Mining
Keyboard Command: grdvals
File Name: \lsp\pond.arx