This command automates running the Calculate Residuals command. For
this command, you
set up a list of strata names, values and modeling methods. Then all
these methods can be run and
the results displayed in a formatted report.
This command starts by prompting for the drillholes to process. The
list of available strata
comes from these selected drillholes. Then a dialog is displayed that
has function keys and shows a
list of the methods. Use the Add button to append an entry to
the list. The Add routine will bring
up a dialog for entering a strata name, value and modeling method. To
edit an entry in the
list, highlight the entry and pick the Edit
button.
The Move Up/Down buttons change the order
of the selected entry. The Sort button will sort the list by
strata name. The
On/Off buttons change
the processing status of the highlighted entry. The Auto-Run Residuals
list can be saved to a
file with a .RES extension. The Use Report Formatter
option will activate the report formatter for choosing which fields
to report. Otherwise the report is in the same format as the
Calculate Residuals command. The Summary Report Only
option will report only the strata name, method, and overall
statistics. Turn this option off to get a report of the residuals at
each
point. Pick the Calc Residuals button to process the list. For
more description on the various modeling methods, go to Make Strata
Grids where they are described.
Pulldown Menu Location: StrataCalc in Advanced Mining
Keyboard Command: autostat
File Name: \lsp\makegrid.arx