This command freezes all the layers except the ones you select an
entity on. The program
prompts to see if you would like to retain the POINT layers which keeps
the Carlson point layers
from freezing. By default, these layers include PNTNO, PNTMARK,
PNTDESC,
and PNTELEV.
Select objects on layers to
isolate.
Select objects: pick entities
Retain POINT layers
[Yes/<No>]? Press Enter
Isolate the wall layer by picking one wall line |
Pulldown Menu Location: View
Keyboard Command: isolate
Prerequisite: None
File Name: \lsp\isolate.lsp