This command highlights selected polylines that are crossing in the
drawing. Every intersection point where the polylines cross are
marked with an X. A report is provided at the end where the X and Y of
the intersection points are displayed with the two Z values and the Z
difference.
Select polylines to check.
Select objects: Specify opposite corner: 32 found
Reading points ... 1677
Finding points on breaklines ...
19 crossing polylines are highlighted.
Minimum delta Z to report <0.0>: 2
Add polyline vertices at intersections with average elevation
[Yes/<No>]? N
Pulldown Menu Location: Edit > Polyline Utilities
Keyboard Command: xing_plines
Prerequisite: Polylines with elevations