This command sets up the fields to be displayed when using GIS Data Inspector. Each GIS table code can have different display options stored in the GIS Inspector Settings command.
GIS Inspector Settings reads all the points and entities with GIS
information currently linked
in the drawing and displays a list of the linked data tables under the
Available GIS Table column.
When a GIS Table code is highlighted (i.e. 0001 or Road), the fields
for
this GIS table are
displayed to the right in the Select Fields column. Up to 6 fields or
lines of GIS data can be defined
for display for each GIS code table, including one picture. To add a
field to the display list,
double-click on the field name. To remove a field from the display
list, highlight the GIS table to
remove from and then use the Clear Settings buttons. The Last Option
button will remove the last field
to display from the current GIS table. The Picture Name will remove the
image from the display
list. The Entire Line button removes all the fields from display for
the current GIS table.
Pulldown Menu Location: GIS Data
Keyboard Command: set_inspector
Prerequisite: MDB GIS Prompting must be created in
Define Template Database and points or
entities must have linked GIS information.
File Name: \lsp\gisview.arx