This command checks the GIS links for the selected entities in the drawing to make sure that the template database, output database and table exist. Any invalid links can be erased from the entities or be fixed by selecting another database or table. For example if a database file (.mdb) has moved to another directory, then you can use this command to specify the new location.
The routine starts by
prompting you to select the entities to check.
If no errors are found, then the routine is done. When there are
errors, a dialog box appears. Each GIS link is
defined by a template database, output database
and table. For each combination of these three settings that have an
error, this dialog displays the template database,
output database and table
name from the entities. The number of GIS link
combinations with errors
is shown in Table Used for Links field (i.e. 1 of 2). The template
database is shown at the top. If
the template database link is broken, then use the Select New Template
MDB button to
assign another template database file. The output database also has a
Select New Output MDB to set
the output database file. In the lower left of the dialog is a list of
the table names from the
output database. You can choose the table to use for the link from this
list. The Fix Links for Current
Table button will assign the template database, output database and
table name from the dialog to
all the selected entities. The Erase Links from Table button will
remove these broken links from
the entities. The Go to Other Table button will process the next GIS
link combination with errors.
Pulldown Menu Location: GIS Data
Keyboard Command: audit_links
Prerequisite: Entities with GIS links
File Name: \lsp\gisprt.arx